Handwork: Easy-On Apron

One of the presents I made for Cam for Christmas is an art smock/apron that she can easily put on herself. I was inspired by some aprons we saw at the Monterey Bay Aquarium in their toddler splash area. The genius of them was that they had straps that came around and Velcroed down. It was a simple matter of helping Cam slip it on over her head and she got the rest. I was also inspired by a child’s apron I saw on Etsy that used a towel for the fabric. 

This is a pretty simple project that requires some sewing on the machine. It took me about an hour to make, but I was creating the steps as I went along. If you’re a fairly proficient seamstress I would say you could have it done in half an hour. 

Easy-On ApronWhat You’ll Need

  • an old towel
  • one of your child’s t-shirts (this is to help you gauge the size)
  • bias tape (1 package, but the length will depend on the size of your neck hole)
  • Velcro strips, preferably stick down with strong adhesive
  • scissors
  • sewing machine
  • thread

What To Do

  1. Fold the towel in half and lay out. Place the t-shirt on it to help gauge width and length. I used one of the finished sides (with a hem) and the bottom to reduce the amount of sewing I would have to do. Be sure to make it long enough that it will cover your child’s front. I was generous with length knowing that Cam would grow over the next year. Cut out two pieces, a front and a back. You can cut them together. 
  2. Cut a half round out for the neck. 
  3. Stitch the shoulder together. If your apron is long enough/child is big enough, you may be able to use the fold of the towel to create the shoulders. If that’s the case, you can skip this step.
  4. Pin the bias tape around the neck hole and stitch down. 
  5. Zig-zag stitch the side that isn’t hemmed. Alternatively you could fold over the fabric and do a real hem. You could also put bias tape down it or even around the entire outside edge. I just didn’t have enough to do that and the neck hole. I don’t have a picture of this specifically, but you can see it in the picture above.
  6. From the towel scraps cut two strips about 8-10 inches long. Zig-zag stitch all the way around them to help hem them. You could also use a different fabric here and sew tubes that you turn out if you want to get fancy. 
  7. Place your straps about 2/3rds of the way down on the inside of the back of the apron. Stitch down.
  8. Bring the straps around to the front and stick down the Velcro. I had a large patch of Velcro that I cut pieces from, but if you use the strip Velcro you can use both sides. Stick one side to the strap and one to the front of the apron. The terry cloth fabric of the towel actually loosely sticks to the stiff Velcro. 

Comments are closed.

Post Navigation